Details
Time and Frequency Synchronisation Platform
SecureSync combines Spectracom's precision master clock technology and secure network centric approach with a compact modular hardware design to bring you a powerful time & frequency reference system at the lowest cost of ownership. Military and commercial applications alike will benefit from its extreme reliability, security, and flexibility for synchronisation
An important advantage of SecureSync is its unique rugged chassis designed to meet Mil 810F for environmental performance. The modular design provides for the most cost effective solution. Built-in time and frequency functions are extended with up to 6 I/O modules. Included with the base unit is an extremely accurate 1PPS timing signal aligned to a 10MHz frequency signal without any 10 MHz phase discontinuity. A variety of internal oscillators are available depending on your requirement for holdover and phase noise. On-board clocks synchronise to a variety of external references as standard, factory-installed, or upgradeable options. Add STL to GPS or GNSS input references to improve resilience, or use STL alone for indoor applications. Choose from a variety of option cards to add to your configuration of timing signals, including additional 1PPS, 10MHz, time code (IRIG, ASCII, HaveQuick), other frequencies (5MHz, 2.048 MHz, 1.544 Mhz), telecom T1/E1 data rates, multi-network NTP, and NTP, and PTP. Modules can be customised for your exact requirements.
To support network time synchronisation, SecureSync supports the latest features of network time protocol (NTP) and precision time protocol (PTP, IEEE-1588v2). An optional multi-port NTP configuration allows for operation across 4 isolated LAN segments. Up to 6 PTP ports can be added to operate in various PTP deployments.
SecureSync is a security-hardened network appliance designed to meet rigorous network security standards and best practices. It ensures accurate timing through multiple references, tamper-proof management, and extensive logging. Robust network protocols are used to allow for easy but secure configuration. Features can be enabled or disabled based on your network policies. Installation is aided by DHCP (IPv4), AUTOCONF (IPv6), and a front-panel keypad and display. The 1RU chassis supports GPS input. Options include SAASM, supporting L1/L2, available for authorized users and required for the US DoD, and multi-GNSS (GPS/Galileo/GLONASS/BeiDou/QZSS). The unit is powered by AC on an IEC60320 connector. DC as back-up, or primary, is available.
Manufacturer | spectracom |
---|---|
Part No. | SecureSync |
End of Life? | No |
Width | 425 mm |
Height | 44 mm |
Depth | 364 mm |
Weight [Kg] | 2.95 |
Rack Units | 1U |
Time/Frequency Output | CE, UL, cUL, CSA, FCC part 15 class A, ROHS, WEEE |
Ordering Information | Base Units: 1200-XYZ X = Power, Y = Internal Oscillator, Z = Primary Reference For example, a SecureSync base unit with AC power, OCXO internal oscillator, and GPS as the primary reference is Model Number 1200-013. It comes with a 10/100 Base-T network port and 1 each 1PPS and 10MHz output signals. Order option modules for additional input/output functions. |
Timing Protocols | NTP v2, v3, v4: Conforms with or exceeds RFC 1305 and 5905. Supports Unicast, Broadcast, Multicast, MD5 encryption, Peering, Stratum 2, Autokey SNTP v3, v4: Conforms with or exceeds RFC 1769, 2030, 4330, and 5905 Time (RFC 868) Daytime (RFC 867) IEEE-1588v2 (PTP) via option card(s) NTP over Anycast |
Management | IPv4/IPv6: Dual stackDHCPv4/DHCPv6 (AUTOCONF)/SLAAC: Automatic IP address assignmentAuthentication: LDAP, RADIUS, TACACS+Syslog: LoggingSNMP: Supports v1, v2c, and v3 (no auth/auth/priv) with Enterprise MIB |
Communications | HTTP: Browser-based configuration and monitoring Telnet: Remote configuration FTP Server: Access to files (logs, etc.) SMTP: Email |
Network Ports | RJ-45, 10/100-baseT |
Front Panel | LED segments displays time Lockable keypad and configurable LCD display for network set-up Power/Status LEDs |
Serial Set-Up Interface | RS-232 communications on DB-9 connector |
Receivers | GNSS Receiver: Connector - Type N, +5V to power active antenna Frequency - GPS L1 (1575.42 MHz); optional SAASM: GPS L1 & L2 (1227.6MHz); optional Multi-GNSS: Galileo E1 (1575.42MHz), GLONASS L1 (1602.0 MHz), BeiDou B1 (1561.1 MHz), QZSS L1 (1575.42 MHz) Satellite tracking - 1 to 72, T-RAIM satellite error management Synchronization time - Cold Start < 15 minutes (includes almanac down load), Warm Start < 5 minutes (assumes almanac downloaded) Antenna system - sold separately, included with SAASM GPS |
Oscillator | Standard Oscillator: OCXO Optional Oscillators: TCXO, Low Phase Noise OCXO (LPN OCXO), Rubidium (Rb), Low Phase Noise Rubidium (LPN Rb) |
Power | Choice of: 100-240 VAC, 50/60 Hz, ±10% or 100-120 VAC, 400 Hz, ±10% from IEC60320 connector; power cord included 12-17 VDC, -15% to +20% or 21-60 VDC, -15% to +20%, secure locking device Auto-failover in the case of AC and DC Power Draw: TCXO - 40W normal, 50W start-up OCXO - 40W normal, 50W start-up Rb - 50W normal, 80W start-up LPN Rb - 52W normal, 85W start-up |
Environmental Temperature | Operating: -20 to +65°C (+55°C for Rb) Storage: -40 to +85°C |
Environmental Humidity | 0%-95% RH non-condensing @ 40°C |
Environmental Altitude | Operating: 100-240 VAC up to 6,560 ft (2,000 m); 100-120 VAC up to 13,123 ft (4,000 m); 12-17 VDC and 21-60 VDC up to 13,123 ft (4,000 m) Storage: 45,000 ft (13,700 m) |
Environmental Shock | Operating: 15g,11ms half sine wave Storage: 50g, 11ms half sine wave MIL-STD-810F: 516.5 |
Environmental Vibration | Operating: 10-55Hz/0.07g/Hz 55-500Hz/1.0g/Hz Storage: 10-55Hz/0.15g/Hz 55-500 Hz/2.0g/Hz MIL-STD-810F: 514.5 |
Standard | Five Year Limited Warranty1Oscillator for rubidium option is warranted for two yearsExtended warranty is available |